2007 Infiniti QX56 Owner's Manual - Page 47

The center position of the 3rd row bench seat is the seating position that can use a top tether strap. For the 3rd row bench seat, install the top tether strap as follows: 1. Position the top tether strap over the top of the center seating position seatback. 2. Secure the tether strap to the tether anchor point on floor behind the child restraint. 3. Tighten the tether strap according to the manufacturer's instructions to remove any slack. For best child restraint fit, see the child restraint installation instructions in this section and the child restraint manufacturer's instructions. CHILD RESTRAINT INSTALLATION USING LATCH WARNING ● Attach LATCH compatible child restraints only at the locations shown. For the LATCH lower anchor locations, see "Latch Anchors and Tethers for CHildren System (LATCH)". If a child restraint is not secured properly, your child could be seriously injured or killed in an accident. ● The LATCH anchors are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstance are they to be used for adult seat belts or harnesses. ● Inspect the lower anchors by inserting your fingers into the lower anchor area and feeling to make sure there are no obstructions over the LATCH anchors, such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the LATCH anchors are obstructed. Front-facing Follow these steps to install a front-facing child restraint in the 2nd row seats using LATCH: 1. Recline the seatback if the seatback is adjustable to assist in attaching the child restraint to the lower anchors. 2. Position the child restraint on the seat. Always follow the child restraint manufacturer's instructions. Safety-Seats, seat belts and supplemental restraint system 1-31