2006 Jeep Liberty Owner's Manual - Page 182

182 UNDERSTANDING YOUR INSTRUMENT PANEL 30. Electronic Stability Program (ESP) Warning Light/Brake Assist System (BAS) Warning Light - If Equipped The ESP/BAS warning light in the instrument cluster comes on when the ignition switch is turned to the "ON" position. The light should go out with the engine running. If the ESP/ BAS warning light comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system. If this light stays illuminated, have the ESP and BAS checked at your authorized dealer as soon as possible. Refer to "Electronic Brake Control System" in Section 5 for more information. 31. Electronic Stability Program (ESP) Indicator Light/Traction Control System (TCS) Indicator Light - If Equipped If this indicator light flashes during acceleration, apply as little throttle as possible. While driving, ease up on the accelerator. Adapt your speed and driving to the prevailing road conditions, and do not switch off the ESP, or TCS - if equipped. The indicator light will flash when the ESP or TCS System is active and helping to improve vehicle stability. If the indicator light is on solid, ESP or TCS may not be able to function normally. Refer to "Electronic Brake Control System" in Section 5 for more information.