2006 Jeep Wrangler Owner's Manual - Page 187

STARTING AND OPERATING 187 • When "rocking" a stuck vehicle by shifting between a forward gear and reverse, do not spin wheels faster than 15 mph (24 km/h), or drivetrain damage may result. Recommended Manual Transmission Shifting Speeds Manual Transmission Shift Speeds in MPH (KM/H) Engine Speeds 1 to 2 2 to 3 3 to 4 4 to 5 5 to 6 2.4L Accel. 14 (23) 24 34 46 57 (39) (55) (74) (92) Cruise 11 (18) 19 27 38 45 (31) (43) (61) (72) 4.0L Accel. 15 (24) 24 34 47 56 (39) (55) (76) (90) Cruise 10 (16) 19 27 37 41 (31) (43) (60) (66) Clutch Interlocking Ignition System (Non - Rubicon Models Only) Manual transmission vehicles are equipped with a clutch interlock safety feature. With this feature engaged, you must depress the clutch pedal to allow cranking of the engine. To temporarily bypass this safety feature while off-road driving (4L range only), which will allow cranking the engine without depressing the clutch, follow these steps: 1. Locate the Power Distribution Center (PDC) in the engine compartment. Refer to "Fuse Panel" in Section 7 of this manual. (See page 305 for more information.) 2. Put a 10 Amp fuse in the PDC cavity (#28) marked as Clutch Override. NOTE: A fuse is provided in fuseblock cavity (f19 or f20) marked as Spare. 5