2006 Jeep Wrangler Owner's Manual - Page 250

250 STARTING AND OPERATING Shifting Out Of Neutral (N) Use the following procedure to prepare your vehicle for normal usage. 1. Shift automatic transmission into N (Neutral) or depress clutch pedal on manual transmission. 2. Shift transfer case lever into desired position. 3. Shift automatic transmission into D (Drive) or release clutch on manual transmissions. NOTE: When shifting out of transfer case N (Neutral) on automatic transmission equipped vehicles, turning the engine off may be required to avoid gear clash. WARNING! You or others could be injured if you leave the vehicle unattended with the transfer case in the N (Neutral) position without first fully engaging the parking brake. The transfer case N (Neutral) position disengages both the front and rear driveshafts from the powertrain and will allow the vehicle to move despite the transmission position. The parking brake should always be applied when the driver is not in the vehicle. CAUTION! • Do not use a bumper mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged.