2008 Jeep Wrangler Owner's Manual - Page 423

422 MAINTAINING YOUR VEHICLE 3. Turn the socket assembly 1/4 turn counterclockwise and remove from housing. Pull the bulb straight from the socket to replace. Front Side Marker 1. Reach under the front fender flare and locate the front side marker socket. 2. Turn the socket assembly counterclockwise 1/3 turn and remove it from the housing. Pull the bulb straight from the socket to replace. Front Fog Light 1. Locate the front fog lamp in the front fascia, and disconnect the electrical connector from underneath. 2. Turn the bulb 1/4 turn counterclockwise. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Rear Tail, Stop, Turn Signal, and Backup Lights 1. Remove the two inboard screws attaching the tail light housing to the body. DO NOT REMOVE THE OUTER SCREWS AT ANY TIME.