2009 Jeep Grand Cherokee Owner Manual SRT8 - Page 126

124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Keyless Entry (RKE) transmitters can also be programmed to recall the same positions when the UNLOCK button is pressed. position. The memory system can accommodate up to four RKE transmitters, each one linked to either of the two memory positions. Setting Memory Positions and Linking Remote Keyless Entry (RKE) Transmitter to Memory NOTE: Each time the S (SET) button and a numbered button 1 or 2 are pressed, you erase the memory settings for that button and store a new one. 1. Insert the ignition key, and turn the ignition switch to the ON position. 2. Press the driver door memory button number 1 if you are setting the memory for driver 1, or button number 2 if you are setting the memory for driver 2. The system will recall any stored settings. Wait for the system to complete the memory recall before continuing to Step 3. 3. Adjust the driver's seat, recliner, and driver's sideview mirror to the desired positions. Driver Memory Switches Your vehicle is equipped with two RKE transmitters. One or both RKE transmitters can be linked to either memory