2009 Jeep Grand Cherokee Owner Manual SRT8 - Page 279

STARTING AND OPERATING 277 Removing and Re-Installing the Engine Start/Stop Button The ENGINE START/STOP button may be removed from the receptacle to allow the vehicle ignition to be controlled conventionally by inserting the FOBIK. The button may be removed using the valet key from the FOBIK as a thin tool. Insert the metal part of the valet key under the chrome bezel at the 6 o'clock position, and gently pry the button loose. To reinstall the button, position it with its lettering oriented horizontal and readable. Gently insert the button into the receptacle by pressing on the center of the button. If the button slips in easily, it has been installed correctly. Press firmly on the center of the button to seat the button into the receptacle. The ENGINE START/STOP button should only be removed or inserted with the ignition in the OFF position. Keyless Go Functions - With Driver's Foot Off The Brake Pedal (In PARK Position) • Press the ENGINE START/STOP button once (ACC position) to activate the radio, wipers, and windows. • Press the ENGINE START/STOP button twice (ON position) to start the engine. • Press the ENGINE START/STOP button three times (OFF position) to turn off the ignition switch. Normal Starting Using The ENGINE START/STOP Button NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator pedal. 5