2012 Jeep Patriot Owner Manual - Page 154
2012 Jeep Patriot Manual
Page 154 highlights
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective. Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. NOTE: If the multifunction lever is held in the flash-topass position for more than 20 seconds, the high beams will shut off. If this occurs, wait 30 seconds for the next flash-to-pass operation. Instrument Panel Dimming Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. High/Low Beam Switch Rotate the center portion of the lever up to increase the Push the multifunction lever away from you to switch brightness of the instrument panel lights when the parkthe headlights to high beam. Pull the multifunction lever ing lights or headlights are on. toward you, to switch the headlights back to low beam. Rotate the center portion of the lever upward to the next Flash-To-Pass detent position to brighten the odometer and radio when You can signal another vehicle with your headlights by the parking lights or headlights are on. lightly pulling the multifunction lever toward you. This Rotate the center portion of the lever upward to the last will turn on the high beam headlights until the lever is detent to turn on the interior lighting. released.