2014 Jeep Cherokee Owner Manual - Page 164

162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • For vehicles equipped with an automatic transmission, memory profiles can be set without the vehicle in Your Remote Keyless Entry (RKE) transmitters can be PARK, but the vehicle must be in PARK to recall a programmed to recall one of two pre-programmed memory profiles with a press of the UNLOCK button on memory profile. the RKE transmitter. • For vehicles equipped with a manual transmission, the vehicle speed must be at 0 mph (0 km/h) to recall a NOTE: Before programming your RKE transmitters you must select the "Memory To FOB" feature through the memory profile. Uconnect® system screen. Refer to "Customer- Program• The Recall Memory with Remote Key Unlock feature mable Features - Uconnect® Access 8.4 Settings " in can be turned on and off through the EVIC, if "Understanding Your Instrument Panel" for further inequipped. If the Recall Memory with Remote Key formation. Unlock is not turned on in (EVIC)/CustomerProgrammable Features then the Linking and Unlink- To program your RKE transmitters, perform the following the Remote Keyless Entry Transmitter to Memory ing: will not be successful. Refer to "Electronic Vehicle 1. Remove the key from the ignition. Information Center (EVIC)/Customer-Programmable Features" in "Understanding Your Instrument Panel" for further information. Linking And Unlinking The Remote Keyless Entry Transmitter To Memory