2015 Jeep Cherokee User Guide - Page 34

GETTING STARTED To program a Key Fob to the memory position: 1. Cycle the vehicles ignition to the OFF position. 2. Select the desired memory profile 1 or 2. 3. Press and release the S (SET) button on the memory switch, then within five seconds press and release the 1 or 2 button accordingly. 4. Press and release the LOCK button on the RKE transmitter within 10 seconds. • To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on the programmed RKE transmitter. Easy Entry/Exit Feature The memory seat has an Easy Entry/Exit feature. This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. NOTE: The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory. To enable (or later disable) this feature you must select "Easy Exit Seats" in "Engine Off Options" through the programmable features in the Uconnect® system. • Refer to "Uconnect® Customer Programmable Features" in "Electronics" of this User Guide. • For further details refer to "Uconnect® Settings" in "Understanding Your Instrument Panel" in the Owner's Manual on the DVD. Manual Seat Adjustment Forward/Rearward Lift up on the adjusting bar located at the front of the seat near the floor and release it when the seat is at the desired position. Then, using body pressure, move forward and backward on the seat to be sure that the seat adjusters have latched. Recliner • Lean forward in the seat and lift the recliner lever, then lean back to the desired position and release the lever. • Lift the lever to return the seatback to an upright position. Manual Seat Levers 1 - Adjusting Bar 2 - Height Adjustment 3 - Recliner Lever 32