2010 Kawasaki MULE 4010 4x4 Owners Manual - Page 87
2010 Kawasaki MULE 4010 4x4 Manual
Page 87 highlights
MAINTENANCE AND ADJUSTMENT 85 WARNING The exhaust system can get extremely hot during normal operation and cause serious burns. To avoid a serious burn, never touch a hot muffler or exhaust pipe during oil draining. the cargo bed and support it with the rod. • Lift • Remove the filler plug. Tightening Torque Drain Plug: 15 N·m (1.5 kgf·m, 11 ft·lb) Transmission Case Oil Type API "GL-5" Hypoid gear oil above 5°C (41°F) SAE 90 below 5°C (41°F) SAE 80 Transmission Case Oil Capacity KAF620M: 2.5 L (2.6 US qt) KAF620P: 2.2 L (2.3 US qt) j WARNING Oil on tires can make them slippery which can cause an accident and injury. When draining or filling the transmission case, be careful that no oil gets on the tires or rims. Clean off any oil that inadvertently gets on them with soap and water. Transmission case oil is a toxic substance. Dispose of used oil properly. Contact your local authorities for approved disposal methods or possible recycling. the oil has completely drained out, install the • After drain plug with its gasket. Tighten it to the spec- • Install the filler plug. • ified torque. If the gasket is damaged, replace it with a new one. Fill the transmission case up to the "H" (High) line on the dipstick with a good quality oil as specified in the table.