2013 Kawasaki KX85 Owners Manual - Page 26
2013 Kawasaki KX85 Manual
Page 26 highlights
24 GENERAL INFORMATION Break in the engine as follows. 1. Start the engine and let it idle until it is thoroughly warmed up. 2. Stop and let the engine cool completely. 3. Start the engine and ride the motorcycle for 10 minutes at moderate speed - NEVER ACCELERATE HARD. 4. Stop and let the engine cool completely. Be sure to check and adjust the chain slack and spoke tightness and carry out a general inspection. 5. Start the engine and ride the motorcycle for 20 minutes at moderate speed -NEVER ACCELERATE HARD. 6. Stop and let the engine cool completely. Check and adjust as in step 4. Then, drain the coolant, remove and inspect the cylinder head, cylinder and piston. A scored piston skirt could lower engine performance or damage the cylinder wall. Scores on the cylinder wall should be smoothed with a #400 to #600 emery cloth. Decarbonize the exhaust ports and the upper part of the cylinder, taking care not to damage the cylinder wall. Scores on the cylinder wall should be smoothed with a #400 to #600 emery cloth. Cylinder Head: 7. 8. Remove the carbon inside the combustion chamber. j Install the parts removed. Fill the radiator up to the bottom of the radiator filler neck with coolant. Before putting the motorcycle into operation, bleed the cooling system. 9. Start the engine and ride the motorcycle for 30 minutes at moderate speed - NEVER ACCELERATE HARD. 10. Stop and let the engine cool completely. Check and adjust as in step 4. 11. After the break-in procedure has been properly carried out, the motorcycle is ready for regular operation. Using the proper riding skills and techniques and avoiding recklessly high engine speeds will keep the engine trouble-free. NOTE Piston: żAfter break-in, install a new standard spark plug, and change the transmission oil. żTo keep optimum engine performance, replace the piston rings after break-in. Cylinder: