2013 Kawasaki Teryx 750 FI 4x4 LE Owners Manual - Page 113
2013 Kawasaki Teryx 750 FI 4x4 LE Manual
Page 113 highlights
MAINTENANCE AND ADJUSTMENT 111 Front Final Gear Case Oil (Equivalent to engine oil) Oil Capacity 0.70 L (0.74 US qt) Type Kawasaki Performance 4-Stroke ATV/UTV Oil* Kawasaki Performance 4-Stroke Semi-Synthetic Oil* Kawasaki Performance 4-Stroke Full Synthetic Oil* or other 4-stroke oils with API SG, SH, SJ, SL, SM and JASO MA, MA1, MA2 rating SAE 10W-40 NOTE żDo not add any chemical additive to the oil. Oils fulfilling the above requirements are fully formulated and provide adequate lubrication for both the engine and the clutch. • Install the filler caps. Filler Cap Tightening Torque Front Final Gear 29 N·m (3.0 kgf·m, 21 ft·lb) Case Rear Final Gear Case 29 N·m (3.0 kgf·m, 21 ft·lb) j Viscosity Rear Final Gear Case Oil Oil 1.00 L (1.06 US qt) Capacity Type Kawasaki Performance Gear and Wet Brake Oil* or equivalent (Mobil Fluid 424, Citgo Transgard Tractor Hydraulic Fluid, Exxon Hydraul 560) NOTICE The front and rear final gear cases require different oils. To ensure correct performance and durability, use only the recommended oils. •The front final gear case uses engine oil; the same oil you use in the engine. The front gear case contains the variable differential system which operates best when lubricated by engine oil. •The rear final gear case uses a special oil type; refer to the chart above. The rear gear case contains the rear brake discs which must be lubricated by Kawasaki Performance Gear and Wet Brake Oil (or equivalent) to ensure long life and proper performance. *Kawasaki Performance Oils and Lubricants have been specifically engineered for your vehicle. Consistent use of these products meets or exceeds warranty and service requirements and can help to extend the life of your Kawasaki.