2014 Kawasaki KLX110 Owners Manual - Page 50
2014 Kawasaki KLX110 Manual
Page 50 highlights
MAINTENANCE AND ADJUSTMENT 49 Tightening Torque Engine Oil Drain Bolt: 29 N·m (3.0 kgf·m, 21 ft·lb) Engine Oil Capacity Capacity: 0.9 L (1.0 US qt) (When filter is not removed) 1.0 L (1.1 US qt) (When filter is removed) 1.1 L (1.2 US qt) (When engine is completely dry) The oil viscosity may need to be changed to accommodate atmospheric conditions in your riding area. j ○Replace the gasket and O-ring with a new one. NOTE the engine up to the high level line with good • Fill quality engine oil specified in the table. Recommended Engine Oil Type: Kawasaki Performance 4-Stroke Motorcycle Oil* Kawasaki Performance 4-Stroke Semi-Synthetic Oil* Kawasaki Performance 4-Stroke Full Synthetic Oil* or other 4-stroke oils with API SG, SH, SJ, SL, SM and JASO MA, MA1, MA2 rating Viscosity: SAE 10W-40 *Kawasaki Performance Oils and Lubricants have been specifically engineered for your vehicle. Consistent use of these products meets or exceeds warranty and service requirements and can help to extend the life of your Kawasaki. the oil filler plug. • Tighten Install the engine guard and tighten the bolts. • Tightening Torque Footpeg Bracket Bolts: 25 N·m (2.5 kgf·m, 18 ft·lb) ○Do not add any chemical additive to the oil. NOTE Oils fulfilling the above requirements are fully formulated and provide adequate lubrication for both the engine and the clutch. • Start the engine.