1996 Lexus SC 400 Owners Manual - Page 171

IN CASE OF AN EMERGENCY Tighten each nut a little at a time in the order shown. Repeat the process until all the nuts are tight. If the pressure of the replaced tire is low, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the tire valve cap as dirt and moisture could get into the valve core and possible cause air leakage. If the cap is missing, put a new one on as soon as possible. This is the same procedure for changing or rotating your tires. ! CAUTION As soon as possible after changing wheels, have the wheel nuts tightened by torque wrench at 103 N·m (10.5 kgf·m, 76 ft·lbf). ! CAUTION Before driving, make sure all the tools, jack and flat tire are securely in place in their storage location to reduce the possibility of personal injury during a collision or sudden braking. IF YOUR VEHICLE NEEDS TO BE TOWED 10. Reinstall the wheel ornament. Put the wheel ornament into position and then tap it firmly with the side or heel of your hand to snap it into place. If towing is necessary, we recommend you have it done by your Lexus dealer or a commercial tow truck service. Proper equipment will help ensure that your vehicle is not damaged while being towed. Commercial operators are generally aware of the state/provincial and local laws pertaining to towing. Your vehicle can be damaged if it is towed incorrectly. Although most operators know the correct procedure, it is possible to make a mistake. To avoid damage to your vehicle, make sure the following few precautions are observed. If necessary, show this page to the tow truck driver. ! CAUTION Take due care in handling the ornament to avoid unexpected personal injury. 11. After changing the wheel, check the air pressure of the replaced tire. Stow all the tools, jack and flat tire securely. 156