1996 Lexus SC 400 Owners Manual - Page 93

DRIVING POSITION MEMORY SYSTEM DRIVING POSITION MEMORY SYSTEM The micro computer can memorize the position of the driver's seat, the positions of the tilt and telescopic steering, and outside rear view mirrors. Two different driving position profiles can be entered into the computer's memory. This can only be done when the ignition key is in the "ON" position, and the selector lever is in the "P" position (automatic) or the parking brake is applied (manual). Setting a driving position The beep sound means that the positions are recorded in the computer's memory. By repeating these two steps and pressing the remaining button, the driving position for another driver can be recorded. To set a new memorized position, select the desired position and perform step 2. The previous memory will be erased and the new position will be set. To make only slight changes to an already memorized position, the easiest way is to first activate the memorized position, then make the desired changes and perform step 2 above. Activating a memorized position 1. Adjust the driver's seat, tilt and telescopic steering and outside rear view mirrors to the desired position. 2. While pushing the "SET" button, push button "1" or "2" until the signal beeps. Automatic transmission: When you push button "1" or "2", the signal beeps and the driving position automatically adjusts to the position recorded for that button. 79