1997 Lexus SC 400 Owners Manual - Page 228

1997 Lexus SC 400 Manual

Page 228 highlights

CHASSIS CHECKING POWER STEERING FLUID If the vehicle has been driven around 80 km/h (50 mph) for 20 minutes (a little more in frigid temperatures), the fluid is hot (60°C-80°C or 140°F-175°F). You may also check the level when the fluid is cold (about room temperature, 10°C-30°C or 50°F-85°F) if the engine has not been run for about five hours. Check the fluid level on the dipstick. If necessary, add automatic transmission fluid DEXRON®II or III. 1. Clean all the dirt off the reservoir. 2. Remove the filler cap by turning it counterclockwise and wipe the dipstick clean. 3. Reinstall the filler cap. 4. Remove the filler cap again and look at the fluid level. If the fluid is cold, the level should be in the "COLD" range on the dipstick. Similarly, if it is hot, the fluid level should be in the "HOT" range. If the level is at the low side of either range, add automatic transmission fluid DEXRON®II or III to bring the level within the range. 5. After replacing the filler cap, visually check the steering box case, vane pump and hose connections for leaks or damage. 219

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263

CHASSIS
219
CHECKING POWER STEERING
FLUID
Check the fluid level on the dipstick.
If necessary, add
automatic transmission fluid
DEXRON
II
or
III
.
If the vehicle has been driven around 80 km/h (50 mph) for
20 minutes (a little more in frigid temperatures), the fluid is
hot (60
°
C–80
°
C or 140
°
F–175
°
F).
You may also check the
level when the fluid is cold (about room temperature,
10
°
C–30
°
C or 50
°
F–85
°
F) if the engine has not been run for
about five hours.
1.
Clean all the dirt off the reservoir.
2.
Remove the filler cap by turning it counterclockwise and
wipe the dipstick clean.
3.
Reinstall the filler cap.
4.
Remove the filler cap again and look at the fluid level.
If the fluid is cold, the level should be in the “COLD” range
on the dipstick.
Similarly, if it is hot, the fluid level should be
in the “HOT” range.
If the level is at the low side of either
range, add automatic transmission fluid DEXRON
II
or
III
to bring the level within the range.
5.
After replacing the filler cap, visually check the steering
box case, vane pump and hose connections for leaks or
damage.