1998 Lexus ES 300 Owners Manual - Page 220

1998 Lexus ES 300 Manual

Page 220 highlights

ELECTRICAL COMPONENTS Checking battery exterior NOTICE ¤ ¤ Make sure the engine and all accessories are turned off before performing maintenance. When checking the battery, remove the ground cable first and reinstall it last. Be careful not to cause a short circuit with tools. Take care no solution gets into the battery when washing it. 64E007 ¤ ¤ Checking battery fluid " 1 Terminals 2 Hold-down clamp There are 2 types of batteries: maintenance type and non-maintenance type. A non-maintenance battery has "MAINTENANCE FREE BATTERY" on its top. A maintenance type battery does not have such indication. Maintenance type battery Check the fluid condition by the fluid level lines on the side of the battery. Or if the battery has a hydrometer on its top, you can also check the hydrometer. Non-maintenance battery Check the battery condition by the hydrometer on the top of the battery. Check the battery for corroded or loose connections, cracks, or loose hold-down clamps. 1. If the battery is corroded, wash it off with a solution of warm water and baking soda. Coat the terminals with grease to prevent further corrosion. 2. If the connections are loose, tighten the clamp bolts - but do not overtighten. 3. Tighten the hold-down clamp only enough to keep the battery firmly in place. Overtightening may damage the battery case. 220

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249

ELECTRICAL COMPONENTS
220
Checking battery exterior
64E007
"
1
Terminals
2
Hold–down clamp
Check the battery for corroded or loose connections, cracks, or loose
hold–down clamps.
1.
If the battery is corroded, wash it off with a solution of warm water and
baking soda.
Coat the terminals with grease to prevent further corrosion.
2. If the connections are loose, tighten the clamp bolts – but do not
overtighten.
3.
Tighten the hold–down clamp only enough to keep the battery firmly in
place.
Overtightening may damage the battery case.
NOTICE
Make sure the engine and all accessories are turned off before
performing maintenance.
When checking the battery, remove the ground cable first and reinstall
it last.
Be careful not to cause a short circuit with tools.
Take care no solution gets into the battery when washing it.
Checking battery fluid
There are 2 types of batteries:
maintenance type and non–maintenance
type.
A non–maintenance battery has ”MAINTENANCE FREE BATTERY” on its
top.
A maintenance type battery does not have such indication.
Maintenance type battery
Check the fluid condition by the fluid level lines on the side of the battery.
Or
if the battery has a hydrometer on its top, you can also check the hydrometer.
Non–maintenance battery
Check the battery condition by the hydrometer on the top of the battery.