1999 Lexus LX 470 User Guide 2 - Page 252
1999 Lexus LX 470 Manual
Page 252 highlights
IN CASE OF AN EMERGENCY 40X006a 40X007d 4. Loosen all the wheel nuts. Always loosen the wheel nuts before raising the vehicle. Turn the nuts counterclockwise to loosen them. To get maximum leverage, fit the wrench to the nut so that the handle is on the right side, as shown above. Grab the wrench near the end of the handle and pull up on the handle. Be careful that the wrench does not slip off the nut. Do not remove the nuts yet - just unscrew them about one-half turn. 5. Position the jack at the jack points as shown. Make sure the jack is positioned on a level and solid surface. JACK POINTS: Front - Under the chassis frame side rail at the No.2 body mount bracket Rear - Under the rear axle housing 236
IN CASE OF AN EMERGENCY
236
40X006a
4.
Loosen all the wheel nuts.
Always loosen the wheel nuts before raising the vehicle.
Turn the nuts counterclockwise to loosen them.
To get
maximum leverage, fit the wrench to the nut so that the handle
is on the right side, as shown above.
Grab the wrench near the
end of the handle and pull up on the handle.
Be careful that the
wrench does not slip off the nut.
Do not remove the nuts yet – just unscrew them about one–half
turn.
40X007d
5.
Position the jack at the jack points as shown.
Make sure the jack is positioned on a level and solid surface.
JACK POINTS:
Front – Under the chassis frame side rail at the No.2 body
mount bracket
Rear – Under the rear axle housing