2002 Lexus RX 300 Owners Manual - Page 168

AIR CONDITIONING SETTING OPERATION − manual control When one of the manual control buttons is depressed while operating in automatic mode, the mode relevant to the depressed button is set. Other conditions continue to be adjusted automatically. If manual air flow selection is desired − If quick heating or cooling is desired − Turn the temperature selector knob until "MAX. HOT" or "MAX. COLD" appears on the display. When the "MAX. COLD" is selected, the air intake is automatically set to RECIRCULATED AIR mode. If manual fan speed control is desired − 20R005b 20R006c The outlets from which air is delivered can be selected manually by pushing the "MODE" button. The function of each mode is as follows: 1 2 3 4 Panel − Air flows mainly from the instrument panel vents. Bi−level − Air flows from both the floor vents and the instrument panel vents. Floor − Air flows mainly from the floor vents. Unheated air is also delivered through the side vents during heating. Floor/Windshield − Air flows mainly from the floor vents and windshield vents. Unheated air is also delivered through the side vents during heating. " 1 Toward low fan speed 2 Toward high fan speed The fan speed can be set to your desired speed by turning the fan speed control button. The higher the fan speed is, the more air is delivered. Pushing the "OFF" button turns off the fan. To remove exterior windshield frost, use the high speed setting. 148 2002 MY RX300_U (OM48416U)