2002 Lexus SC 430 Owners Manual - Page 214

KEYS AND DOORS 3 Shift into the "2" position. The transmission will downshift to the second gear when the vehicle speed is or becomes lower than 82 km/h (51 mph) and more powerful engine braking than that of "3" position will be obtained. Shift into the "L" position. The transmission will downshift to the first gear when the vehicle speed is or becomes lower than 39 km/h (24 mph) and maximum engine braking will be applied. (c) Using the "3", "2" and "L" positions The "3", "2" and "L" positions are used for strong engine braking as described previously. With the selector lever in "3", "2" or "L", you can start the vehicle in motion as with the lever in "D". With the selector lever in "3" or "2", the vehicle will start in the first gear and automatically shift to the third or second gear. With the selector lever in "L", the transmission is engaged in the first gear. 4 CAUTION Be careful when downshifting on a slippery surface. The abrupt change in engine speed could cause the vehicle to spin or skid. NOTICE D Be careful not to over-rev the engine. Watch the tachometer to keep engine rpm from going into the red zone. The approximate maximum allowable speed for each position is given below for your reference: "3" ...147 km/h "2" ...96 km/h "L" ...62 km/h (92 mph) (60 mph) (39 mph) D Do not continue hill climbing or hard towing for a long time in the "3", "2" or "L" position. This may cause severe automatic transmission damage from overheating. To prevent such damage, "4" position should be used in hill climbing or hard towing. 201 SC430 through December 2001 Production