2003 Lexus SC 430 User Guide - Page 164

COMFORT ADJUSTMENT DRIVING POSITION MEMORY SYSTEM A microcomputer will memorize the position of the driver's seat, the positions of the tilt and telescopic steering, and outside rear view mirrors. Two different driving position profiles can be entered into the computer's memory. Recording a driving position in the computer's memory can only be done when the ignition switch is in the "ON" position and the selector lever is in the "P" position. The same buttons are found on the front passenger's side, allowing the position of the front passenger's seat to be memorized. 2. While pushing the "SET" button, push button "1" or "2" until the signal beeps. The beep sound means that the positions are recorded in the computer's memory. By repeating these two steps and pressing the remaining button, the driving position for another driver can be recorded. To set a new memorized position, select the desired position and perform step 2. The previous memory will be erased and the new position will be set. To make only slight changes to an already memorized position, the easiest way is to first activate the memorized position, then make the desired changes and perform step 2 above. Setting the driving position 16sa44 1. Adjust the driver's seat, tilt and telescopic steering and outside rear view mirrors to the desired position. 146