2005 Lexus RX 330 Owners Manual - Page 425
2005 Lexus RX 330 Manual
Page 425 highlights
STARTING AND DRIVING (c) Using the "3", "2" and "L" positions The "3", "2" and "L" positions are used for strong engine braking as described previously. With the selector lever in "3", "2" or "L", you can start the vehicle in motion as with the lever in "D". With the selector lever in "3" or "2", the vehicle will start in first gear and automatically shift to second gear or third gear. With the selector lever in "L", the transmission is engaged in first gear. (d) Backing up NOTICE D Be careful not to over−rev the engine. Watch the tachometer to keep engine rpm from going into the red zone. The approximate maximum allowable speed for each position is given below for your reference. "3" ...144 km/h (90 mph) "2" ...92 km/h (58 mph) "L" ...51 km/h (32 mph) D Do not continue hill climbing or hard towing for a long time in the "3", "2" or "L" position. This may cause severe automatic transmission damage from overheating. To prevent such damage, "4" position should be used in hill climbing or hard towing. " 1 Brake pedal 2 "R" (Reverse) position 1. Bring the vehicle to a complete stop. 2. With the brake pedal held down with your foot, shift the selector lever to the "R" position. NOTICE Never shift into reverse while the vehicle is moving. Vehicles with driving position memory system - When the shift lever is shifted into "R" position, the outside rear view mirrors automatically down to help backing up. For details, see page 231. 394