2005 Lexus RX 330 Owners Manual - Page 473

STARTING AND DRIVING D Selecting the "N" mode To change "HI" to "N" mode: Push the height select switch on the "B" (lower) side once. To change "LO" to "N" mode: Push the height select switch on the "Y" (higher) side once. The "N" indicator light blinks as the vehicle's height changes. When the vehicle's height reaches the "N" mode, the indicator light remains on. Even if the engine stops while the vehicle's height is being lowered, the operation continues for up to one minute. D Selecting the "LO" mode To change "N" mode to "LO": Push the height select switch on the "B" (lower) side once. To change "HI" mode to "LO": Push the height select switch on the "B" (lower) side twice. The "LO" indicator light blinks as the vehicle's height changes. When the vehicle's height reaches the "LO" mode, the indicator light remains on. Even if the engine stops while the vehicle's height is being lowered, the operation continues for up to one minute. 2 Lower " 1 Higher 3 Height control indicator lights Selecting a mode: To select a mode, push either side of the height select switch "Y" (higher) or "B" (lower). D Selecting the "HI" mode You can select the "HI" mode when the vehicle's speed is under approximately 30 km/h (19 mph). To change "N" to "HI" mode: Push the height selection switch on the "Y" (higher) side once. To change "LO" to "HI" mode: Push the height selection switch on the "Y" (higher) side twice. The "HI" indicator light blinks as the vehicle's height changes. When the vehicle's height reaches the "HI" mode, the indicator light remains on. 442