2010 Lexus IS 250 Owners Manual - Page 114

33

1-2. Opening, closing and locking the doors and trunk

1

■

Switching the door unlock function

It is possible to set which doors the entry function unlocks.

Turn the “ENGINE START STOP” switch OFF.

When the indicator on the key surface is turned off, push and

hold

,

or

for approximately 5 seconds while pushing

on the key.

The setting changes each time an operation is performed, as shown below. (When

changing the setting continuously, release the buttons, wait for at least 5 seconds,

and repeat step 2.)

Unlock the doors using the electronic key and open one of the doors.

If a door is not opened within 60 seconds after

is pressed, the doors

will be locked again and the alarm will automatically be set. In case that

the alarm is triggered, immediately stop the alarm. (

→

P. 95)

STEP

1

STEP

2

Multi-information

display

Unlocking doors

Beep

Hold the driver's door handle

to unlock only the driver's

door.

Exterior: Beeps three

times

Interior: Pings once

Hold the passenger’s door

handle to unlock both side

doors.

Hold either door handle to

unlock both side doors.

Exterior: Beeps twice

Interior: Pings once

STEP

3