2010 Lexus IS 250 Owners Manual - Page 252

172

2-2. Instrument cluster

■

Gear position display

(vehicles with an automatic transmission only)

Indicates the current gear, and the range of gears

that is available when the shift lever is in the D or S

position. The gear range is shown by the number of

dots (

•

) and the current gear is shown as a number.

The transmission automatically selects the gears

within the driver selected gear range.

In the illustration to the left, a range of 6 available gears

(1 through 6) has been selected by the driver. (The shift

lever is in the D or S position with 6 ranges enabled) It is

possible for the transmission to automatically select

between all 6 of the gears. In this case, the transmission

has selected third gear.

■

System check display

After switching the “ENGINE START STOP” switch to IGNITION ON mode,

“CHECK” is displayed while system operation is checked. When the system check

is complete, “COMPLETE” is displayed before returning to the normal screen.

■

Outside temperature display

In the following situations, the correct outside temperature may not be displayed, or

the display may take longer than normal to change.

●

When stopped, or driving at low speeds (less than 12 mph [20 km/h])

●

When the outside temperature has changed suddenly (at the entrance/exit of a

garage, tunnel, etc.)