1997 Lincoln Continental Owner's Manual - Page 52

If unusual conditions exist (i.e., window fogging, etc.), the six manual override buttons allow you to select special air discharge locations. A thumbwheel allows you to adjust the fan speed to suit your needs. Temperature selection The RED and BLUE buttons at the upper left of the Control are for temperature selection. The RED Button will increase the set temperature and the BLUE Button will lower the set temperature. Pressing a button and releasing it will change the set temperature one degree. Holding either button in will rapidly change the temperature setting in one degree increments to either 65˚F (18˚C) (BLUE) or 85˚F (29˚C) (RED). Then, the set temperature will jump 5˚ and stop at either 60˚F (16˚C) which is maximum cooling or 90˚F (32˚C) which is maximum heating. When you select 60˚F (16˚C) or 90˚F (32˚C), the fan will go to HI speed for maximum air flow. The AUTO temperature display When in AUTOMATIC and weather conditions require heat, air will be sent to the floor. But, a feature is included in your EATC to prevent blowing cold air to the floor if the engine coolant is not warm enough to allow heating. In 3-1/2 minutes or less, the fan speed will start to increase and the airflow will change to the floor area. 48