2002 Lincoln Navigator Owner Guide 1st Printing - Page 93

Locks and security • on the owner's wallet card in the glove compartment • taped to the computer module • or at your dealer. When pressing the controls on the keyless entry keypad, press the middle of the controls to ensure a good activation. This system will disable the power door lock controls. These will not work until the vehicle is disarmed. Refer to Power door locks in the Driver Controls chapter for more information. Programming your own personal entry code To program your own code: 1. Enter factory set code (keypad will illuminate when pressed). 2. Press 1/2 control within five seconds of step 1. 1 2 3 4 5 6 7 8 9 0 3. Enter your personal 5 digit code. Enter each digit within five seconds of previous one. Do not set a code that includes five of the same number or presents them in sequential order. Thieves can easily figure out these types of codes. Your personal code does not replace the permanent code that the dealership gave you. You can use either code to unlock your vehicle. If a second personal code is entered, the module will erase it in favor of the new code. If you wish to erase your personal code, use the following instructions: 1. Enter factory set code. 2. Press 1/2 control within five seconds of step one. 1 2 3 4 5 6 7 8 9 0 3. Press 7/8 control and 9/0 control at the same time within five seconds of step 2. The system will now only respond to the factory set code. 93