2009 Lincoln MKS Owner's Manual - Page 205

Tires, Wheels and Loading Follow these guidelines when using snow tires and chains: • Use only SAE class "S" cables or equivalent on P235/55R18 tires on the front tires only. SAE class "S" chains or other conventional link chains may cause damage to the vehicles wheel house and/or body. Use of optional spike spider type traction devices or equivalent is also acceptable. • Do not install tire chains, cables, or optional traction devices on the rear tires. This could cause damage to the vehicle's wheel house or body. • Do not use tire chains, cables, or optional traction devices with optional P255/45R19 or 245/45R20 tires. • Install tire cables securely, verifying that the tire cables do not touch any wiring, brake lines or fuel lines. • Drive cautiously. If you hear the cables rub or bang against your vehicle, stop and re-tighten the cables. If this does not work, remove the cables to prevent damage to your vehicle. • If possible, avoid fully loading your vehicle. • Remove the tire cables when they are no longer needed. Do not use tire cables on dry roads. • The suspension insulation and bumpers will help prevent vehicle damage. Do not remove these components from your vehicle when using snow tires and chains. • Do not exceed 30 mph (48 km/h) with tire cables on your vehicle. VEHICLE LOADING - WITH AND WITHOUT A TRAILER This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading your vehicle will provide maximum return of vehicle design performance. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle's weight ratings, with or without a trailer, from the vehicle's Tire Label or Safety Compliance Certification Label: Base Curb Weight - is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment. 205