2011 Lincoln MKT Owner Guide 1st Printing - Page 107

Lights Replacing front parking lamp/turn signal bulbs For bulb replacement, see your authorized dealer. Replacing rear stop/tail/turn/backup and side marker lamps Your vehicle is equipped with stop/tail/turn/backup and side marker lamp assemblies containing integral multiple light emitting diodes (LED). If replacement is required, see your authorized dealer. Replacing license plate lamp bulbs 1. Make sure the headlamp switch is in the off position. 2. Remove the two screws from the license plate lamp assembly and pull it down. 3. Carefully pull the bulb out from the contacts. Install new bulb(s) in reverse order. Replacing fog lamp bulbs 1. Make sure the fog lamp switch is in the off position. 2. From underneath the vehicle, partially remove the tire splash shield by removing four drive screws. After removing to allow free access to the front fog lamp bulb and electrical wire harness, the splash shield flap should be able to be repositioned. 3. Rotate the harness/bulb assembly counterclockwise, to remove from the fog lamp. 4. Carefully disconnect the bulb from the harness assembly by releasing the two snap clips. Install the new bulb in reverse order. 107 2011 MKT (mkt) Owners Guide, 1st Printing USA (fus)