2013 Lincoln MKS Owner Manual Printing 2 - Page 204

204 Driving Aids System Settings The system has three optional setting menus available. To view or adjust them, select Settings > Vehicle Settings > Driver Assist > Lane Keeping Sys in the left-hand instrument cluster display using the OK button on the steering wheel. The last-known selection for each of these settings is stored by the system. You do not need to readjust your settings each time you turn on the system. Mode: This setting allows the driver to select which of the system features will be enabled and turned on when the button is pressed. • Alert only - Provides a steering wheel vibration when an unintended lane departure is detected. • Aid only - Provides a steering input toward the lane center when an unintended lane departure is detected. • Alert + Aid Sensitivity: This setting affects where in the lane a warning is provided (e.g. the increased sensitivity setting will move the warning zones in closer). This setting does not impact the aid mode. • Normal • Increased Intensity: This setting affects the intensity of the steering wheel vibration used for the alert mode. This setting does not impact the aid mode. • Low • Medium • High System Display When the system is turned on, an overhead graphic of a vehicle with lane markings will be displayed in the left-hand instrument cluster display. If the aid mode is selected when the system is turned on, a separate white icon will also appear in the instrument cluster. When the system is turned off, the lane marking graphics will not be displayed. Note: The overhead vehicle graphic may still be displayed if adaptive cruise control is enabled. 2013 MKS (mks) Owners Guide gf, 2nd Printing USA (fus)