2008 Mazda MAZDA3 Owner's Manual - Page 316
2008 Mazda MAZDA3 Manual
Page 316 highlights
Maintenance and Care Owner Maintenance 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconnect the bulb from the socket. 2. Disconnect the electrical connector from the socket. 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconnect the bulb from the socket. 5. Install the new bulb in the reverse order of removal. NOTE To replace the bulb, contact an Authorized Mazda Dealer. 5. Install the new bulb in the reverse order of removal. NOTE To replace the bulb, contact an Authorized Mazda Dealer. 5 Door With LED bulb Due to the complexity and difficulty of the procedure, the LED bulbs should be replaced by an Authorized Mazda Dealer. With Non-LED bulb 1. Remove the liftgate upper trim. License plate lights 1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the lens, and then remove the lens by carefully prying on the edge of the lens with a flathead screwdriver. 8-48