2009 Mazda CX-7 Owner's Manual - Page 209
2009 Mazda CX-7 Manual
Page 209 highlights
Driving Your Mazda Warning/Indicator Lights and Beep Sounds NOTE If the battery is disconnected or a fuse is replaced, the DSC will be inoperable. When this happens, the TCS OFF indicator light flashes and the TCS/DSC indicator light illuminates. To reactivate the DSC, perform the following procedure with the battery connected. 1. Turn the ignition switch to the ON position. 2. Turn the steering clockwise fully, then turn it counterclockwise fully. 3. Make sure the TCS OFF indicator turns off. 4. Turn the ignition switch to the OFF position, then turn it to the ON position again. 5. Make sure the TCS/DSC indicator light turns off. If the TCS/DSC indicator light and the TCS OFF indicator light remain illuminated even after turning the ignition switch to the ON position, attempt the procedure again. If this still does not work, consult an Authorized Mazda Dealer. Cruise Set Indicator Light (Green) The indicator light illuminates green when a cruising speed has been set. qLight-On Indicator Light This indicator light comes on when the exterior lights and dashboard illumination are on. qTurn-Signal/Hazard Warning Indicator Lights qCruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green) When operating the turn signal lights, the left or right turn signal indicator light flashes to indicate which turn signal light is operating (page 5-56). When operating the hazard warning lights, both turn signal indicator lights flash (page 5-60). NOTE If an indicator light remains illuminated (does not flash) or if it flashes abnormally, one of the turn signal bulbs may be burned out. The indicator light has two colors. Cruise Main Indicator Light (Amber) The indicator light illuminates amber when the ON/OFF switch is pressed and the cruise control system is activated. 5-51