2009 Mazda CX-7 Owner's Manual - Page 35

Essential Safety Equipment Seat Belt Systems qUnfastening the Seat Belt Depress the button on the buckle. If the belt does not fully retract, pull it out and check for kinks or twists. Then make sure it remains untwisted as it retracts. CAUTION Always unfasten the lap portion of the belt before folding the left-rear seatback. Leaving the lap portion of the belt fastened could cause damage to the seat belt, buckle and seatback. NOTE To encourage rear seat passengers to wear their seat belts, we suggest leaving the centerrear lap position of the belt fastened at all times except when folding the rear seat forward. Button qFastening the Lap Portion of the Seat Belt Grasp tongue (A) and insert it into the anchor buckle (B) until you hear a click. It is now secure for passenger use. NOTE After returning the left-rear seatback to its upright position, fasten the lap portion of the belt. NOTE If a belt does not fully retract, inspect it for kinks and twists. If it is still not retracting properly, have it inspected at an Authorized Mazda Dealer. qUnfastening the Lap Portion of the Seat Belt Insert a small object such as a key in the anchor buckle (B) slot. (A) (B) qStowing and pulling out the Center-Rear Position Seat Belt The center-rear position seat belt can be stowed using the following procedure. CAUTION When stowing the seat belt, make sure the belt is locked securely into the recess. If the seat belt is not properly stowed, it might get caught in the seats and be damaged. 2-23