2010 Mazda CX-9 Owner's Manual - Page 502
2010 Mazda CX-9 Manual
Page 502 highlights
CX-9_8AU2-EA-09G_Edition1 Page502 Wednesday, July 8 2009 12:11 AM Black plate (502,1) Maintenance and Care Owner Maintenance 5. Disconnect the electrical connector from the bulb by pulling the tab on the connector with your finger and pulling the connector downward. NOTE l l l To replace the bulb, contact an Authorized Mazda Dealer If the halogen bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. Use the protective cover and carton of the replacement bulb to dispose of the old bulb promptly out of the reach of children. Parking lights 1. Make sure the ignition switch is turned off and the headlight switch is off. 2. Lift the hood. 6. Turn the socket and bulb assembly to remove it. Carefully remove the bulb from its socket in the reflector by gently pulling it straight backward out of the socket. 3. Turn the cover counterclockwise and remove it. 4. Turn the socket and bulb assembly counterclockwise and remove it. 7. Install the new bulb in the reverse order of removal. 8. Install the coolant reservoir. If you are unsure of how tight the bolts should be, have them inspected at an Authorized Mazda Dealer. Bolt tightening torque 6.9―11.8 N·m (kgf·m, ft·lbf) (0.7―1.2, 5.1―8.7) 8-40 Form No.8AU2-EA-09G