2003 Mercedes S-Class Owner's Manual - Page 265
2003 Mercedes S-Class Manual
Page 265 highlights
Operation Engine compartment Checking the engine oil level with the control system You can check the engine oil level on the multifunction display. Turn the SmartKey in the starter switch to position 2. The standard display ( page 135) should appear in the multifunction display. Press buttonk or j on the steering wheel until the following message is seen in the multifunction display: ENGINE OIL LEVEL MEASURING NOW! MEASURE. CORRECT ONLY IF VEH. LEVEL One of the following messages will subsequently appear in the indicator: ENGINE OIL LEVEL OK ADD 1.0 QT. TO REACH MAX. OIL LEVEL! Other display messages If the SmartKey is not turned to position 2 in the starter switch, the following message will appear: FOR ENGINE OIL LEVEL SWITCH ON IGNITION! (Canada: 1.0 LITER) ADD 1.5 QTS. TO REACH MAX. OIL LEVEL! Switch on the ignition. If you see the message: OBSERVE WAITING PERIOD (Canada: 1.5 LITERS) ADD 2.0 QTS. TO REACH MAX. OIL LEVEL! Wait five minutes before repeating check procedure. If you see the message: ENGINE OIL LEVEL NOT WHEN ENGINE ON! (Canada: 2.0 LITERS) If necessary, add engine oil. For adding oil see ( page 267). Turn off the engine. If engine is at normal operating temperature, wait five minutes before checking oil. If the engine is not yet at normal operating temperature, you must wait 30 minutes before checking oil. 265