2005 Mercedes CL-Class Owner's Manual - Page 351
2005 Mercedes CL-Class Manual
Page 351 highlights
Practical hints What to do if ...? Display Possible cause ENGINE OIL VISIT WORKSHOP ENGINE OIL LEVEL VISIT WORKSHOP Possible solution Have the engine oil level checked ( page 275). Check the engine oil level ( page 275) and add engine oil as required ( page 278). If you must add engine oil frequently, have the engine checked for possible leaks. : It may be that there is water in the engine oil. The engine oil has dropped to a critical level. OIL SENSOR MALFUNCT. The measuring system is malfunctioning. VISIT WORKSHOP Have the measuring system checked by an authorized Mercedes-Benz Center. When the message ADD 1.0 QT. OIL AT FILLING STATION (Canada: 1 Liter) appears while the engine is running and at operating temperature, the engine oil level has dropped to approximately the minimum level. When this occurs, the warning will first come on intermittently and then stay on if the oil level drops further. Visually check for oil leaks. If no obvious oil leaks are noted, drive to the nearest service station where the engine oil should be topped to the required level with an approved oil specified in the Factory Approved Service Products pamphlet. ! The engine oil level warnings should not be ignored. Extended driving with the symbol displayed could result in serious engine damage that is not covered by the Mercedes-Benz Limited Warranty. 349
![](/manual_guide/autos/2005-mercedes-clclass-owners-manual-f1c0f69/351.png)