2005 Mercedes CL-Class Owner's Manual - Page 387
2005 Mercedes CL-Class Manual
Page 387 highlights
Practical hints Flat tire Before storing the jack in the trunk, it should be fully collapsed, with handle folded in. Place the wheel bolt wrench, alignment bolt and jack back in the vehicle tool kit in the trunk and close the covering lid. Replacing jack support tube cover 1 - 5 Wheel bolts Tighten the five wheel bolts evenly, following the diagonal sequence illustrated (1 to 5), until all bolts are tight. Observe a tightening torque of 110 lb-ft (150 Nm). Warning! Slide tongue of cover under the upper edge of the tube opening. Applying even pressure, press cover until it snaps into place. Be careful not to damage the locking tabs or clamp the plastic retaining strap. ! You can also screw the faulty wheel down into the spare wheel well in the trunk. Do not activate the tire inflation pressure monitor until the depressurized tire is no longer in the vehicle. G Have the tightening torque checked after changing a wheel. The wheels could come loose if they are not tightened to a torque of 110 lb-ft (150 Nm). 385
![](/manual_guide/autos/2005-mercedes-clclass-owners-manual-f1c0f69/387.png)