2005 Mercedes CLK-Class Owner's Manual - Page 55

Getting started Driving Intermittent wiping Turn the combination switch to position I. Wiping with windshield washer fluid Push combination switch in the direction of arrow 1 past the resistance point. The windshield wipers operate with washer fluid. For information on filling up the washer reservoir, see "Windshield washer system and headlamp cleaning system*" ( page 315). turn off the engine by pressing the KEYLESS-GO* start/stop button and open the driver's door (with the driver's door open, starter switch is in position 0, same as with SmartKey removed from starter switch) before attempting to remove any blockage. Remove blockage. Turn the windshield wipers on again. If windshield wipers fail to function at all in switch position I, set the combination switch to the next highest wiper speed have the windshield wipers checked at the nearest authorized Mercedes-Benz Center i The intermittent wiping is interrupted when the vehicle is at a standstill and a door is opened. Single wipe Press combination switch briefly in the direction of arrow 1. The windshield wipers wipe one time without washer fluid. ! If anything blocks the windshield wipers (leaves, snow, etc.), switch them off immediately. For safety reasons, turn off the engine by turning the SmartKey to position 0 and withdraw SmartKey from starter switch or 53