2005 Mercedes G-Class Owner's Manual - Page 350
2005 Mercedes G-Class Manual
Page 350 highlights
Practical hints Flat tire Lowering the vehicle Using the pump lever, open the lowering screw on the jack approximately one turn ( page 348). The vehicle is resting fully on its own weight. Remove the jack. After use, disassemble pump handle ( page 348) and store jack in the designated storage compartment ( page 322). Tighten the five wheel bolts evenly, following the diagonal sequence illustrated (1 to 5), until all bolts are tight. Observe a tightening torque of 97 lb-ft (130 Nm). Warning! Press the jack piston in again and close the lowering screw. Store the jack ( page 322) and the other vehicle tools ( page 321). After changing the wheel, secure the damaged wheel on the spare wheel mounting bracket ( page 324). Make sure the wheel cannot come loose. Check the tire inflation pressure and correct it if necessary. A table with the tire pressure values for your vehicle is located on the fuel filler flap. G Have the tightening torque checked after changing a wheel as soon as possible. The wheels could come loose if they are not tightened to a torque of 97 lb-ft (130 Nm). 1-5 Wheel bolts 350