2005 Mercedes G-Class Owner's Manual - Page 358

Practical hints Towing the vehicle Transporting the vehicle When transporting the vehicle, you can use the towing eyes for pulling the vehicle onto a trailer or transporter. Move the gear selector lever to position N. Shift the transfer case to neutral position N. To avoid damaging the vehicle, it should only be tied down on the wheels/wheel rims, not on chassis components such as the transverse link or trailing arm. Towing the vehicle - various problem scenarios In case of transfer case damage or for towing vehicle distances exceeding 30 miles (50 km) The propeller shafts to the drive axles must be removed. In case of front axle damage Raise the front axle when towing. The propeller shaft between the rear axle and the transfer case must be removed. In case of rear axle damage When the rear axle is raised, the vehicle can only be towed with a wheel lift or a dolly placed under its front wheels. ! When removing drive shaft, place M10 nuts on bolts as distance sleeves and tighten using M8 nuts. Always install new self-locking nuts when reinstalling the drive shaft. Comply with all towing information ( page 356). In case of engine damage, transmission damage or malfunctions in electrical equipment Move the gear selector lever to position N. Shift the transfer case to neutral position N. 358