2007 Mercedes CLK-Class Owner's Manual - Page 406

Practical hints Where will I find...? i Hex wrench: You will find the hex wrench for manually operating the roll bars ( page 413) or the soft top ( page 415) at the lower edge of the storage well casing. Removing the vehicle tool kit Lift up trunk floor cover and engage trunk floor handle in upper edge of trunk. Remove storage well casing 2. Storing the vehicle tool kit Place vehicle tool kit 6 in vehicle tool kit storage well casing 5. Place storage well casing 2 over the vehicle tool kit storage well casing 5 and turn retaining screw 1 clockwise as far it will go to secure the Minispare wheel. i Arrow 3 on vehicle tool kit storage well 3 Arrow 4 Minispare wheel 5 Vehicle tool kit storage well casing 6 Vehicle tool kit Remove vehicle tool kit 6. casing 5 must point in the direction of travel. Otherwise you cannot place the storage well casing 2 on top and secure the Minispare wheel with retaining screw 1. Disengage trunk floor handle in upper edge of trunk and lower trunk floor cover. 1 Retaining screw 2 Storage well casing Loosen retaining screw 1 in the middle of storage well casing 2 by turning it counterclockwise. ! To prevent damage, always disengage trunk floor handle from upper edge of trunk and lower trunk floor before closing the trunk. 405