2009 Mercedes SL-Class Owner's Manual - Page 215

Operation Tires and wheels Seating capacity The seating capacity gives you important information on the number of occupants that can be in the vehicle. The Tire and Loading Information placard showing the seating capacity is located on the driver's door B-pillar (Y page 212). Steps for determining correct load limit The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traffic and Motor Vehicle Safety Act of 1966". X Step 1: Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle's Tire and Loading Information placard. X 1 Load limit information on the Tire and Loading Information placard The Tire and Loading Information placard showing the load limit information is located on the driver's door B-pillar (Y page 212). X Locate the statement "The combined weight of occupants and cargo should never exceed XXX kilograms or XXX lbs." on the Tire and Loading Information placard. The combined weight of all occupants, cargo/luggage and trailer tongue load (if applicable) should never exceed the weight referenced in that statement. i Data shown on Tire and Loading Information placard example are for illustration purposes only. Seating capacity data are specific to each vehicle and may vary from data shown in the following illustration. Refer to Tire and Loading Information placard on vehicle for actual data specific to your vehicle. Step 2: Determine the combined weight of the driver and passengers that will be riding in your vehicle. Step 3: Subtract the combined weight of the driver and passengers from XXX kilograms or XXX lbs. Step 4: The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1 400 lbs and there will be five 150 lbs passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1 400 - 750 (5 x 150) = 650 lbs). Step 5: Determine the combined weight of luggage and cargo being loaded on the Z X X 1 Seating capacity information on the Tire X and Loading Information placard 213