2010 Mercedes GL-Class Owner's Manual - Page 143
2010 Mercedes GL-Class Manual
Page 143 highlights
Control system Once DSR is switched on, you can adjust the set speed using the cruise control lever (Y page 157). 141 Trip computer menu function If the distance warning function is switched on you will see the symbol Ä in the Standard display. When the distance warning function is switched off the symbol Ä will not appear. RFuel consumption statistics since start (Y page 141) (Y page 142) RFuel consumption statistics since last reset RResetting RDistance RCurrent DSR (Downhill Speed Regulation) programmed default speed Use this function to program the default speed the DSR is set to when it is activated. You can program the default speed between 3 - 10 mph (Canada: 4- 18 km/h). The set value is increased in 1 mph (Canada: 2 km/h) increments. X Press button V or U repeatedly until the Vehicle configuration menu appears in the multifunction display. X Press button & or * repeatedly until the message DSR Speed appears in the multifunction display. The selection marker is on the current setting. fuel consumption statistics (Y page 142) to empty (Y page 142) fuel consumption (Y page 142) When you enter the Trip computer menu, you will always see the fuel consumption statistics since start first. Fuel consumption statistics since start X Press button U or V repeatedly until the message From Start appears in the multifunction display. : Distance driven since start ; Time elapsed since start = Average speed since start ? Average fuel consumption since start X Press button W or X repeatedly until the desired speed is shown in the multifunction display. When DSR is switched on, DSR will use the programmed default speed to regulate the vehicle's speed. All statistics stored since the last engine start will be reset approximately 4 hours after the SmartKey in the starter switch is turned to position 0 or removed from the starter switch. Resetting will not occur if you turn the SmartKey back to position 1 or 2 within this time period. Z Controls in detail : Symbol for activated distance warning Use the Trip computer menu to call up statistical data on your vehicle. The following information is available: