2011 Mercedes G-Class Owner's Manual - Page 95

Exterior lighting Combination switch Turn signal High-beam flasher X 93 To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine. X Pull the combination switch briefly in the direction of arrow =. The K indicator lamp in the instrument cluster lights up briefly. Hazard warning lamps X To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow ; or ?. The corresponding turn signal flashes three times. X To indicate: press the combination switch beyond the pressure point in the direction of arrow ; or ?. The corresponding ! or # indicator lamp in the instrument cluster flashes. High-beam headlamps X To switch on: turn the SmartKey to position 2 in the ignition lock or start the engine. X Turn the light switch to L. X Press the combination switch beyond the pressure point in the direction of arrow :. The K indicator lamp in the instrument cluster lights up. X To deactivate: move the combination switch back to its normal position. The K indicator lamp in the instrument cluster goes out. The hazard warning lamp switches on automatically if an air bag or the belt tensioners are triggered and the SmartKey is in position 1 in the ignition lock. X To switch on: press button :. All turn signals flash. If you now switch on a turn signal using the combination switch, only the turn signal lamp on the corresponding side of the vehicle will flash. X To switch off: press the : button. i The hazard warning lamps still operate if the ignition is switched off. Headlamp cleaning system The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated fifteen times while the lights are on and the engine is running (Y page 102). When you switch off the ignition, the automatic headlamp cleaning system is reset and counting is resumed from 0. Z Lights and windshield wipers