1997 Mercury Sable Owner's Manual - Page 125
1997 Mercury Sable Manual
Page 125 highlights
Maintenance and care 3. Turn the engine off. 3.0L Vulcan engine 4. Check the fluid level on the dipstick. It should be between the arrows in the FULL HOT range. Do not add fluid if the level is within this range. FULL HOT 5. If the fluid is low, add fluid in small amounts, continuously checking the level until it reaches the FULL HOT range. Be sure to put the dipstick back in the reservoir. 3.0L Duratec engine 4. Check the fluid level on the dipstick. It should be between the MIN and MAX lines. Do not add fluid if the level is within this range. MAX MIN 5. If the fluid is low, add fluid in small amounts, continuously checking the level until it reaches the range between the MIN and MAX lines. Be sure to put the dipstick back in the reservoir. AUTOMATIC TRANSAXLE FLUID Under normal circumstances, the transaxle fluid does not need to be checked. Refer to the Service Guide for fluid replacement intervals. If the transaxle is not working properly - for instance, the transaxle may slip or shift slowly or even some fluid leakage (red fluid under the vehicle) - the fluid should be checked. 125