1997 Mercury Sable Owner's Manual - Page 71
1997 Mercury Sable Manual
Page 71 highlights
Seating and safety restraints 2. Use a screwdriver or coin to snap the covers off the anchor in a rearward and upward direction. Remove the covers completely. 3. Snap the tether strap hook onto the U-shaped tether anchor. BUILT-IN CHILD SEATS Built-in child safety seat (wagon - if equipped) The second row bench seat may include a built-in child seat. This child seat conforms to all Federal and local motor vehicle safety standards. Read the labels located on the child seat cushion and shoulder belt for information on the built-in child seat. Use the built-in child seat only if the child is at least one year old, weighs 10-27 kg (22-60 lbs.) and the child's shoulders fit below the shoulder harness slots on the built-in child seat. Children not meeting these requirements should be secured in an approved aftermarket seat. Refer to Children and infant or child safety seats in this chapter. Built-in child seat retractors The belts on built-in child seats are equipped with a retractor that locks when both tongues are latched into the crotch safety belt buckle. The retractor will automatically snug the belts around the child. If the belts do not remain snug, take the vehicle to the dealer for child seat repair. The belts will not snug during a collision. 71