2001 Mercury Sable Owner Guide 3rd Printing - Page 111
2001 Mercury Sable Manual
Page 111 highlights
Seating and safety restraints If the safety seat is not anchored properly, the risk of a child being injured in a collision greatly increases. Attaching child safety seats with LATCH attachments for child seat anchors Some child safety seats are labeled as LATCH or LATCH-compatible child seats. These seats include two rigid or webbing mounted attachments that connect to two anchors at specific seating positions in your vehicle. This type of child seat eliminates the need to use seat belts to attach the child seat. For forward-facing child seats, the tether strap must also be attached to the proper tether anchor point. For information on using tether straps with the child safety seats, refer to Attaching safety seats with tether straps in this chapter. LATCH anchors for child seat installation have been provided in your vehicle at the following locations: The anchors at the center of the rear seat are the same distance apart as the lower anchors for child seat installation at other seating positions. A LATCH compatible child seat can also be used at this seating position. Do not attach a child seat to any lower anchor if an adjacent child seat is attached to that anchor. Do not attach a child seat to any lower anchors used for child seat installation if an adjacent child seat is attached to that anchor. In a crash, one anchor may not be strong enough to hold two child seat attachments and may break, causing serious injury or death. 111