2001 Mercury Sable Owner Guide 3rd Printing - Page 196
2001 Mercury Sable Manual
Page 196 highlights
Maintenance and care 5. Carefully pull bulb straight out of the socket and push in the new bulb. 6. Install the bulb socket into the lamp assembly by rotating it clockwise. 7. Carefully position the headlamp assembly onto the vehicle. 8. Hold the headlamp assembly snugly against the vehicle and install the retainer pins straight down to lock the lamp into place. 9. Before reinstalling the bolt, make sure the retainer pins are fully seated, and install bolt on headlamp housing. 10. Turn the headlamps on and make sure they work properly. If the headlamp was correctly aligned before you changed the bulb, you should not need to align it again. Replacing high-mount brakelamp bulbs - Sedan only • TYPE A 1. Open trunk and locate the insulator under the rear window. 196