2002 Mercury Villager Owner's Manual - Page 119

Seating and Safety Restraints 2. Press button 1 or 2 and hold for at least two seconds. The indicator light will stay on until the position is programmed. When the position has been programmed, the indicator light will flash three times. Repeat procedure for second position. To record a remote entry transmitter: 1. Program a desired position to a memory switch as indicated above. 2. Press and hold the desired memory position button. Within ten seconds, press the unlock button on the transmitter while the memory button is pressed. 3. When the transmitter has been programmed, the indicator will flash five times. The indicator light will remain illuminated until the memory button is pressed again or ten seconds lapse. To remove a programmed seat position: 1. Press and hold both memory seat buttons 1 and 2 and then press the unlock button on the remote entry transmitter. REAR SEATS Removable floor mats Whenever the floor mats are removed to adjust or move any of the rear seats, always reinstall the mats before passengers ride in the vehicle. The floor mats are specifically designed to keep objects out of the seat tracks. • 7 passenger vehicle A. Cargo mat (if equipped) B. Narrow mats C. Sliding door mats, LH/RH A B C 119